Marking device STL20VLM-809
This type of devices is made for obtaining picture by means of laser engraving/ marking. The construction allows to maximize probable working marking place.
The device is produced …..( вформ-факторевозимый?),that provide mobility and easiness in moving to another working zone.
The device is placed into working zone, joint to set 220V and joint to computer with fixed software. The device is supplied (fitted up) with electrical elevator (lift) of 250 stroke. The elevator is made on the base of asynchronous motor. Vertical stroke is stabilized (protected) from vibration by means of linear bearings and rail way with carriage. The device has multilevel table, which allows to set different types of objectives up to 300x300 mm fields. Focusing on the surface is realized in two modes:
1. Auto search (scan) of the focus point
2. Hand (manual), by pushing virtual buttons in the window PO.
Focus sensor traces (follows) shift (modification) of focusing point, that can be seen in the window PO. The type of sensor is photoelectrical. The device is completed protective screen with IR filter. It can be supplied with protective glasses if it is necessary.
|
Name |
Measurement units |
Value |
|
Laser type |
Fiber |
|
|
Laser power |
Wt |
10, 20, 50 |
|
Engraving field |
mm |
60х60; 100х100; 160х160; 200х200; 250х250; 300х300 |
|
Scanning method |
Angular |
|
|
Size of spot on field |
mkm |
60 (objective SKR-100) |
|
Software resolution ? |
line/mm |
650 (objective SKR-100) |
|
Max engraving speed |
mm/s |
10 000 |
|
Max velocity at no-load operation |
mm/s |
25 000 |
|
Vertical movement range |
mm |
100 |
|
Design environment |
own PO(STL410) Corel Draw
AutoCad |
|
|
Voltage |
V |
220 |
|
Max power consumption |
Wt |
300 |
|
weight |
kg |
58 |
|
laser working time, more |
hour |
50 000 |
|
overall dimensions, WxLxH |
mm |
700х820х1380 |
Дополнительная информация:
