Marking device STL20VLM-822

This type of devices is made for obtaining picture by means of laser engraving/  marking. The construction is based on conception of handle positioning ( setting) of the processing head on the oversize wares. The device is produced …..( вформ-факторе?),that provide high capacity  of the table and structural strength.

The device is placed into working zone joint   to set 220V and joint to computer with fixed software. The device is supplied (fitted up) with electrical elevator (lift) of 250 stroke. The elevator is made on the base of asynchronous motor .Vertical stroke is stabilized (protected) from vibration by means of linear bearings and rail way with carriage. The device has   the system of handle positioning of the processing head (SHP), that allows to apply different types of lettering to large and heavy wares. There are also another modification of such device with outrigger positioning system (SHP) for marking heavy wares transporting by trolleys. Focusing on the working surface is realized (effected) through the manual positioning mode by pushing electric buttons and terminal sensor.

The device is completed with protective screen with IR filter. It can be supplied  with protective glasses if it is necessary. 

 

Technical characteristics
 Name
 Measurement units
 Value
 Laser type  ----  Fiber
 Laser power  Wt  10, 20, 50
 Engraving field   mm

 100х100; 160х160 

 Scanning method ----  Angular
 Size of spot on field mkm  60 (objective SKR-100)
 Software resolution ? line/mm  650 (objective SKR-1000)
 Max engraving speed mm/s  10 000 
 Max velocity at no-load operation  mm/s  25 000
 Vertical movement range mm  100
 Design environment    

own PO(STL410)

Corel Draw

AutoCad
 Voltage V
 220
 Max power consumption  Wt
 300
 Weight  kg
 175
Laser working time, more  hour
 50 000

overall dimensions,

WxLxH
mm  
   
 

Дополнительная информация:

Типовой паспорт (PDF)

Габаритный чертеж (PDF)

Установка лазерной маркировки 822

Партнеры:

Соц. сети